Molecular dynamics calculations: Difference between revisions

Revision as of 11:55, 3 June 2019

Compilation

First of all to run molecular dynamics calculation VASP has to be compiled using the -Dtbdyn precompiler flag in the makefile.include file. A sample input using this tag would look like this:

CPP     = $(CPP_) -DHOST=\"IFC9_fftw\" \
          -Dkind8 -DNGXhalf  -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc  \
          -Dtbdyn

Basic example

To run a basic molecular dynamics calculation perform the following steps:

Choose a POSCAR containing a large enough super cell.
If it a continuation run is performed copy CONTCAR to POSCAR or possibly deliver initial velocities in the POSCAR file. They are written after the Wycoff positions in an own paragraph. If no initial velocities are provided the random velocities are assumed at the beginning of the calculation. This is fully ok but the user should be aware that due to the initial random velocities the trajectory can change at the beginning of the molecular dynamics.
Set main INCAR tags:
- IBRION=0: Molecular dynamics calculations are enabled by setting the IBRION tag to 0.
- POTIM: This tag sets the time step in fs for the molecular dynamics run.
- NSW: This tag sets the number of steps performed in the molecular dynamics run.
- TEBEG: If a thermostat is used define the desired temperature at which the molecular dynamics calculations should run.
- ISIF (optional).
- MDALGO: This tag decides whether the molecular dynamics run is executed using without a thermostat (MDALGO=0 which is default) or with a thermostat (MDALGO>0). For regular molecular dynamics calculations the thermostat is selected by a one digit number (e.g. 1 for Andersen, 2 for Nose-Hoover etc.). For biased molecular dynamics, metadynamics etc. the thermostat is selected by a two digit number where the first digit corresponds to the thermostat analogously to regular molecular dynamics and the second digit corresponds to the molecular dynamics type (e.g. 11 metadynamics with Andersen thermostat, 21 metadynamics with Nose-Hoover thermostat etc.). The NVE ensemble is a special case. It is available by selecting the Andersen thermostat and setting no collisions with the heat bath (ANDERSEN_PROB=0). Or by setting SMASS-3 without setting the MDALGO tag (default of 0 is then used).
- ISIF: In molecular dynamics calculations this tag is used to choose the NVT ensemble or NpT ensemble (the NVE ensemble is a special case!). For ISIF=2 the volume is kept constant and the NVT ensemble is used. Using this tag the stress tensor is calculated and hence the pressure can be monitored. For ISIF=3 the stress tensor (pressure) is kept constant and the NPT ensemble is used. Using this tag the volume is calculated and can be monitored.
Decide which ensemble to use:
- NVT: Set ISIF=2.
- NpT: Set ISIF=3.
- NVE: Set SMASS=-3 or ANDERSEN_PROB=0.0.
Decide which thermostat to use (the combination of thermostats and ensembles is given in table):
- Andersen thermostat: Set MDALGO=1. Also set ANDERSON_PROB>0.0 to control the stochastic update frequency of the thermostat.
- Nose-Hoover thermostat: Set MDALGO=2. Also set SMASS>0.0 to control the coupling to the heat bath.
- Langevin thermostat: Set MDALGO=3. Also set LANGEVIN_GAMMA>0.0 to control the friction parameter. If the NpT ensemble is used (by setting ISIF=3) additionally the friction coefficient of the lattice LANGEVIN_GAMMA_L has to be provided too.

Main INCAR tags

The following INCAR tags can be important for the thermostats:

- MDALGO=1: The ANDERSEN_PROB=0

They are not controlled by the ISIF tag. A calculation in this ensemble can be achieved by setting setting ANDERSEN_PROB=0 (when MDALGO=1 is used) or setting SMASS=-3.

Combination of Ensembles and thermostats

	Thermostat
Ensemble	Andersen	Nose-Hoover	Langevin	NHC	CSVR	Multiple Andersen
Microcanonical (NVE)	MDALGO=1, ANDERSEN_PROB=0.0
Canonical (NVT)	MDALGO=1	MDALGO=2	MDALGO=3	MDALGO=4	MDALGO=5	MDALGO=13
Canonical (NVT)	ISIF=2	ISIF=2	ISIF=2	ISIF=2	ISIF=2	ISIF=2
Isobaric-isothermal (NpT)	not available	not available	MDALGO=3	not available	not available	not available
Isobaric-isothermal (NpT)	not available	not available	ISIF=3	not available	not available	not available
Isoenthalpic-isobaric (NpH)	MDALGO=3, ISIF=3, LANGEVIN_GAMMA=LANGEVIN_GAMMA_L=0.0

@@ Line 4: / Line 4: @@
             -Dkind8 -DNGXhalf  -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc  \
             -Dtbdyn
+== Basic example ==
+To run a basic molecular dynamics calculation perform the following steps:
+*Choose a {{TAG|POSCAR}} containing a large enough super cell.
+*If it a continuation run is performed copy {{TAG|CONTCAR}} to {{TAG|POSCAR}} or possibly deliver initial velocities in the {{TAG|POSCAR}} file. They are written after the Wycoff positions in an own paragraph. If no initial velocities are provided the random velocities are assumed at the beginning of the calculation. This is fully ok but the user should be aware that due to the initial random velocities the trajectory can change at the beginning of the molecular dynamics.
+*Set main {{TAG|INCAR}} tags:
+**{{TAG|IBRION}}=0: Molecular dynamics calculations are enabled by setting the {{TAG|IBRION}} tag to 0.
+**{{TAG|POTIM}}: This tag sets the time step in fs for the molecular dynamics run.
+**{{TAG|NSW}}: This tag sets the number of steps performed in the molecular dynamics run.
+**{{TAG|TEBEG}}: If a thermostat is used define the desired temperature at which the molecular dynamics calculations should run.
+**{{TAG|ISIF}} (optional).
+**{{TAG|MDALGO}}: This tag decides whether the molecular dynamics run is executed using without a thermostat ({{TAG|MDALGO}}=0 which is default) or with a thermostat ({{TAG|MDALGO}}>0).  For regular molecular dynamics calculations the thermostat is selected by a one digit number (e.g. 1 for Andersen, 2 for Nose-Hoover etc.). For biased molecular dynamics, metadynamics etc. the thermostat is selected by a two digit number where the first digit corresponds to the thermostat analogously to regular molecular dynamics and the second digit corresponds to the molecular dynamics type (e.g. 11 metadynamics with Andersen thermostat, 21 metadynamics with Nose-Hoover thermostat etc.). The NVE ensemble is a special case. It is available by selecting the Andersen thermostat and setting no collisions with the heat bath ({{TAG|ANDERSEN_PROB}}=0). Or by setting {{TAG|SMASS-3}} without setting the {{TAG|MDALGO}} tag (default of 0 is then used).
+**{{TAG|ISIF}}: In molecular dynamics calculations this tag is used to choose the {{TAG|NVT ensemble}} or {{TAG|NpT ensemble}} (the {{TAG|NVE}} ensemble is a special case!). For {{TAG|ISIF}}=2 the volume is kept constant and the {{TAG|NVT ensemble}} is used. Using this tag the stress tensor is calculated and hence the pressure can be monitored. For {{TAG|ISIF}}=3 the stress tensor (pressure) is kept constant and the {{TAG|NPT ensemble}} is used. Using this tag the volume is calculated and can be monitored.
+*Decide which ensemble to use:
+**NVT: Set {{TAG|ISIF}}=2.
+**NpT: Set {{TAG|ISIF}}=3.
+**NVE: Set {{TAG|SMASS}}=-3 or {{TAG|ANDERSEN_PROB}}=0.0.
+*Decide which thermostat to use (the combination of thermostats and ensembles is given in table):
+**{{TAG|Andersen thermostat}}: Set {{TAG|MDALGO}}=1. Also set {{TAG|ANDERSON_PROB}}>0.0 to control the stochastic update frequency of the thermostat.
+**{{TAG|Nose-Hoover thermostat}}: Set {{TAG|MDALGO}}=2. Also set {{TAG|SMASS}}>0.0 to control the coupling to the heat bath.
+**{{TAG|Langevin thermostat}}: Set {{TAG|MDALGO}}=3. Also set {{TAG|LANGEVIN_GAMMA}}>0.0 to control the friction parameter. If the {{TAG|NpT ensemble}} is used (by setting {{TAG|ISIF}}=3) additionally the friction coefficient of the lattice {{TAG|LANGEVIN_GAMMA_L}} has to be provided too.
 == Main INCAR tags ==
-*{{TAG|IBRION}}=0: Molecular dynamics calculations are enabled by setting the {{TAG|IBRION}} tag to 0.
-*{{TAG|MDALGO}}: This tag selects the type of thermostat used in the molecular dynamics calculations. For regular molecular dynamics calculations the thermostat is selected by a one digit number (e.g. 1 for Andersen, 2 for Nose-Hoover etc.). For biased molecular dynamics, metadynamics etc. the thermostat is selected by a two digit number where the first digit corresponds to the thermostat analogously to regular molecular dynamics and the second digit corresponds to the molecular dynamics type (e.g. 11 metadynamics with Andersen thermostat, 21 metadynamics with Nose-Hoover thermostat etc.). The NVE ensemble is a special case. It is available by selecting the Andersen thermostat and setting no collisions with the heat bath ({{TAG|ANDERSEN_PROB}}=0).
+ The following {{TAG|INCAR}} tags can be important for the thermostats:
-*{{TAG|ISIF}}: The type of ensemble is chosen via this tag.
+**{{TAG|MDALGO}}=1: The {{TAG|ANDERSEN_PROB}}=0
-**For {{TAG|ISIF}}=2 the volume is kept constant and the {{TAG|NVT ensemble}} is used. Using this tag the stress tensor is calculated and hence the pressure can be monitored.
+ They are not controlled by the {{TAG|ISIF}} tag. A calculation in this ensemble can be achieved by setting setting {{TAG|ANDERSEN_PROB}}=0 (when {{TAG|MDALGO}}=1 is used) or setting {{TAG|SMASS}}=-3.
-**For {{TAG|ISIF}}=3 the stress tensor (pressure) is kept constant and the {{TAG|NPT ensemble}} is used. Using this tag the volume is calculated and can be monitored.
-**Calculations using the {{TAG|NVE ensemble}} are a special case. They are not controlled by the {{TAG|ISIF}} tag. A calculation in this ensemble can be achieved by setting setting {{TAG|ANDERSEN_PROB}}=0 (when {{TAG|MDALGO}}=1 is used) or setting {{TAG|SMASS}}=-3.
 == Combination of Ensembles and thermostats ==